Follow Us:

Twitter Rss


Browse Flowering Elbow

Latest Blog Entries

Outside FE

Other Cool Sites

24Volt Broken Bosch Drill into ‘Super’ Drill

This is a fix/hack for the Bosch PSB24 VE-2 battery powered drill that may also work for others.  The modification has a fun upgrade thrown in.

Bosch PSB24 VE2

The Bosch PSB24 VE2 has a well known fault with its permanent magnet motor. The magnets are not bonded to the can very well and tend to come away, usually cracking in the process. The Bosch service centre will not repair these, saying it is not economic. As the motor is a ‘sealed’ unit, it makes it difficult to repair. But with a little ingenuity and a Dremel (or similar) tool, it is not too much trouble to sort out.

But we don’t just want to sort it out though, right? We want to make it a SUPER DRILL!

The permanent magnets should be stuck to the inside of the motor can and not come out when you pull the armature out.

The permanent magnets should be stuck to the inside of the motor can and not come out when you pull the armature out.

Responses to ‘Broken’ to ‘Super’ Drill

  1. Ken Wainwright
    June 7th, 2013 at 2:41 pm

    I have had the same problem as above, I have stripped the motor and the magnetic field on one side fell out, I would be very gratfull if you could tell me where to purchase new magnetic fields.

    regards

    Ken Wainwright

  2. bruce
    July 19th, 2014 at 9:26 pm

    Ken,
    You can get a new magnetic field in the same shops where you buy electric currents, flux capacitors and elbow grease.
    Happy Hunting
    B

  3. Malcolm
    June 28th, 2016 at 7:41 pm

    I have a little used one of these drills which appears to have “seized up” it won’t rotate. Does this sound like same problem

Add a Comment, Question or Musing

What is 2 + 4 ?
Please leave these two fields as-is:
To comment, answer the following, so we know that you are a human :-)